How To Jailbreak iOS 6.1.3 On iPhone And iPod Touch With Redsn0w [ Full Guide ]

How To Jailbreak iOS 6.1.3 On iPhone And iPod Touch With Redsn0w [ Full Guide ] - Few days ago, Apple has released iOS 6.1.3 with new features and improvements. This new firmware was very impressive on many users who have already upgraded their devices to iOS 6.1.3 without thinking. Unluckily, there are two problems with iOS 6.1.3 – “First problem” is that  Evasi0n jailbreak is not compatible with iOS 6.1.3 as you won’t able to jailbreak iOS 6.1.3 untethered now – “Second one” is that you won’t able to downgrade to older version of firmware. We will give you a temporary solution to solve this case. We will show you how to jailbreak iOS 6.1.3 tethered on iPhone and iPod Touch in detail with a video guide after the jump.

Redn0w Jailbreak iOS 6.1.3

 

How To Jailbreak iOS 6.1.3 On iPhone And iPod Touch With Redsn0w [ Full Guide ] :

 

However, devices with an A4 processor can receive a tethered jailbreak , which this tutorial will describe.

Note 1: This guide describes a tethered jailbreak for A4 devices (iPhone 4, iPhone 3GS, iPod touch 4G) using the latest redsn0w version only

Note 2: If you are not on iOS 6.1.3, it is recommended that you DO NOT UPGRADE, since this will ruin any current untethered jailbreaks.

Note 3: Before jailbreaking with this tutorial, it is recommended that you read through it first, so you can become familiar with the steps.

Note 4: if your iPhone is unlocked via Ultrasn0w, you should stay away from iOS 6.1.3 becasue there is no unlock solution available for now.

 

Devices Supported : 

  • iPhone 4
  • iPhone 3GS
  • iPod Touch 4G

Download Requirements :

  • Download Redsn0w 0.9.15b3 [ Windows ]
  • Download Redsn0w 0.9.15b3 [ Mac ]
  • Download iOS 6.0 for  iPhone 4 /3GS, iPod touch 4G

How To Jailbreak iPhone, iPod touch and iPad on iOS 6.1.3

Step 1: Download iOS 6.0 firmware or newer.

Step 2: Download Redsn0w 0.9.15b3 from the links above.

Step 3: Connect your ( iPhone 4 / iPhone 3GS / iPod Touch 4G ) to your computer.

iPhone Sync To PC

 

Step 4: Double click the redsn0w zip file and extract it. Navigate to the extracted redsn0w folder, and launch the redsn0w application.

Note : Windows XP and Windows 7 users should run Redsn0w as ‘Administrator’ (right-click on the Redsn0w exe and select ‘Run as an Administrator’)

Step 5: Click on ‘Extras‘, then click on ‘Select IPSW‘. Point redsn0w to the 6.0 firmware, which you downloaded in step 1.

 

Jailbreak iOS 6.1.3 with redsn0w

 

Jailbreak iOS 6.1.3 With Redsn0w 2

Jailbreak iOS 6.1.3

Step 6: Go back to redsn0w’s welcome page, and click the ‘Jailbreak’ button.

Jailbreak iOS 6.1.3 with redsn0w

Step 7: Redsn0w should now start preparing the jailbreak data.

Redsn0w 0.9.15b3 To Jailbreak iOS 6.1.3

Step 8: Now you may select your jailbreak options – we only recommend that ‘Cydia‘ is selected. Then click ‘Next‘ to continue.

Redsn0w 0.9.15b3

Step 9: Now you will have to put your device into DFU mode. Redsn0w will guide you through the steps below:

  • Hold down the power button (on top of your device) for 3 seconds.
  • Then, without releasing the power button, hold down the home button and keep the two buttons pressed for 10 seconds.
  • Now release the power button, but keep holding the home button down until redsn0w detects your device.

Jailbreak iOS 6.1.3 Using redsn0w

 

Jailbreak iOS 6.1.3 With Redsn0w 8

 

Jailbreak iOS 6.1.3 With Redsn0w 9

 

Jailbreak iOS 6.1.3 With Redsn0w 10

Step 10: After redsn0w detects your device, and if everything has gone successfully, then your device will reboot, and a pineapple logo will appear, indicating a tethered boot. You will now have to wait for the process to complete

Once it is complete, you should see the lock screen on your iOS device but Cydia still missing

Step 11: Launch Redsn0w again and click on “Extras” button Then “Select IPSW” button and Point redsn0w to the 6.0 firmware, which you downloaded in step 1

Step 12: Then click on the Just Boot button.

Step 13: Now you will need to put your device is DFU mode, follow the steps on step 9

If all of the above went according to plan, then congratulations! You have jailbroken your A4 device. In order to boot your device from now on, you will need to connect it to your computer, open redsn0w, then go to ‘Extras’, and click on ‘Just Boot’

How To Jailbreak iOS 6.1.3 On iPhone 4, iPhone 3GS and iPod Touch 4G (Video) :

We will cover you with all news about jailbreak and unlock community. Stay tuned and don’t go far :).

Share

Leave a Reply

Your email address will not be published. Required fields are marked *


*